Description
Remote Control Pendant
This handheld control is used to both program and remotely operate the power source. Designed to withstand hard use, the pendant incorporates a completely sealed, waterproof silicone rubber panel keypad, impervious to grinding debris and weld spatter. The color LCD display is protected by a tempered glass shield. The intuitive switch layout allows the welder to make program override corrections without lifting his hood.
Pipemaster 515
| Specifications | ||
|---|---|---|
| Application | For use with many Magnatech weld head models (GTAW process), welding lathes, and dedicated weld systems | |
| Functions controlled | Weld current output/current pulsing, weld head rotation, weld head wire feed speed, electronic arc voltage | |
| Output power | 0 – 200 amps | |
| Input power requirements (rated load) | 230 VAC, 1 Ø, 4.0 KVA, 50/60 Hz | |
| Internal memory capacity | 100 weld programs | |
| Units of measurement | Metric and Inch (selectable) | |
| Program transfer | Solid state digital media (USB flash drive/memory key) | |
| Language selection | English, Spanish, German, French, others | |
| Settable override limits | Individually scalable overrides on each function 0 – 100% | |
| Maximum open circuit voltage | 80 V | |
| Water and gas flow switches | Standard. Prevent damage to equipment and workpiece | |
| Data recording/printout | Operator ID, weld ID number, program number, material, OD, wall thickness, date, time, weld head model, project, drawing, programmed parameters, user notes | |
| QC-parameter monitoring/recording/printout | Records actual parameters and deviations from preprogrammed limits | |
| Arc start type | High voltage impulse | |
| Operating/storage temperature | Operating: -18 to 50° C (0 to 120° F) Storage: -25 to 60° C (-20 to 140° F) | |
| Humidity To 98% RH (non-condensing) | To 98% RH (non-condensing) | |
| Dimensions/weights | ||
| MODEL 515 POWER SOURCE | MODEL 905 CIRCULATOR | |
| Length | 48 cm (19�) | 48 cm (19�) |
| Width | 35 cm (14�) | 35 cm (14�) |
| Height | 43 cm (17�) | 27 cm (11�) |
| Weight | 41 Kgs (91 Lbs) | 15 Kgs (34 Lbs) |
| Weight – Model 515 | 35 Kgs (77 Lbs) | 15 Kgs (34 Lbs) |
Features
- Multi-pass welding of pipes/tubes/tubesheets
- Full function capability (torch rotation, filler wire feed, electronic arc gap control, electronic oscillation)
- Operates all models of Magnatech weld Heads(GTAW process)
- 200 Amp Output
- Autoranging input eliminates all internal modifications
- Up to 100 levels per program (Media-based programs)
- Stores 100 weld programs internally
- Auto Program automatically generates procedures
- Programming and operation guided by simple prompts
- Teach mode allows rapid program development
- Programmable “override limits� provide supervisory control
- Weld parameter monitoring/out-of-limits reporting for QA/QC purpose
- Transfer programs and QC data to PC using USB flash drive “Memory Key�
- AutoTack automatically generates tack weld programs
- Large color LCD display
- Stainless steel case
- Help Files provide immediate information/assistance
- Password protection of key functions
- Waterproof Remote Pendant (25’/8m cable)
- Auto rewind feature unwraps cable at weld completion
- All weld Head functions capable of synchronization with pulsed current output
- Selectable Position or Time-based programming
- Integral switch prevents welding without torch gas flow
- Integral printer
- Detachable coolant recirculator with integral flow switch protection
- Meets applicable NEMA, CE, CSA standards
Options
- Cart with bottle rack
- Extension cables
- Rugged storage/shipping case
Reviews
There are no reviews yet.